1 16

NeebRC

2600KV Brushless Power Combo for MN82, MN78, MN99S & MN168

2600KV Brushless Power Combo for MN82, MN78, MN99S & MN168

$183.00 NZD
$183.00 NZD
Sale Sold out
Free shipping on orders over $29. Shipping calculated at checkout.
Connector
  • FREE Shipping for Orders over $29!
  • Dispatch Within 1 Business Day!
  • 30-Day Change of Mind Returns!

Upgrade your MN Series RC crawler with this complete brushless power combo, featuring a 2322 2600KV brushless motor, metal gearbox, 45A AM32 ESC, 7-channel radio system and 9kg metal-gear steering servo.

Designed to provide stronger low-speed torque, smoother throttle response and improved climbing performance, this compact system fits compatible MN Series vehicles without normally requiring the gearbox opening or vehicle body to be modified.

Compatible models:

  • MN82
  • MN82 Pro
  • MN82S
  • MN82T
  • MN78
  • MN99S
  • MN168

Key features:

  • Compact 2322 2600KV external-rotor brushless motor
  • Metal gearbox with 14 × 14mm mounting aperture
  • 45A AM32 ESC with sine-wave startup
  • Built-in low-speed torque compensation
  • Smoother throttle response and improved climbing control
  • NB-7D 7-channel 2.4GHz transmitter
  • RX-G7X receiver with integrated light and winch connections
  • Direct connection for compatible MN Series 8-pin lighting plugs
  • NB-S007M digital servo with metal gears
  • Up to 9kgf·cm steering torque
  • Adjustable throttle limit and programmable fail-safe
  • Multi-channel mixing capability

Important ESC startup information:

When the ESC is switched on, you may hear two short tones without the final long confirmation tone. This does not normally mean that the motor or ESC is faulty. It indicates that the ESC has not recognised the transmitter’s neutral throttle position.

To correct this:

  1. Switch on the transmitter and centre the throttle trigger.
  2. Switch on the ESC.
  3. Slowly adjust the TH/TRIM control around its centre position.
  4. Continue fine-tuning until the ESC produces the long confirmation tone.

The motor should operate once the neutral throttle position has been recognised. Keep the vehicle’s wheels raised off the ground during initial setup.

2322 2600KV motor specifications:

  • Motor type: External-rotor brushless crawler motor
  • Motor size: 2322
  • KV rating: 2600KV
  • Operating voltage: 5.5–9V
  • Rated voltage: 7.2V DC
  • Maximum no-load current: 1,200mA
  • No-load speed: 19,000rpm ±10%
  • Loaded speed: Approximately 17,000rpm
  • Load torque: 100gf·cm
  • Rotation: Clockwise or counter-clockwise
  • Insulation rating: Class B
  • Maximum axial play: 0.3mm
  • Motor gear: 10T

45A AM32 ESC specifications:

  • Battery compatibility: 2S–3S LiPo
  • Operating voltage: 7.4–11.1V
  • Continuous current: 45A
  • Startup type: Sine-wave startup
  • Low-speed torque compensation: Yes
  • Battery connector: SM 3.0 or T-Plug, depending on the selected option
  • Dimensions: 38.5 × 28 × 18.5mm
  • Case material: Plastic

NB-S007M servo specifications:

  • Type: Digital metal-gear servo
  • Operating voltage: 4.8–6.0V DC
  • Maximum torque: 9kgf·cm
  • Stall current: Up to 1,500mA at 4.8V or 1,800mA at 6.0V
  • Control interface: PWM
  • Operating travel: 180° ±10°
  • Mechanical limit: 360°
  • Deadband: 1μs or less
  • Motor type: Core motor
  • Gear material: Metal
  • Case material: ABS
  • Output spline: 25T, Ø5.77mm
  • Weight: Approximately 20.7g
  • Dimensions: 29.6 × 13.2 × 40mm
  • Cable: JR-style connector, approximately 250mm

NB-7D transmitter specifications:

  • Channels: 7
  • Frequency: 2.4GHz
  • Modulation: GFSK
  • Suitable for: RC cars and boats
  • Claimed ground range: More than 150m in suitable conditions
  • Required batteries: Four AA batteries
  • Operating voltage: 4.2–6V
  • Low-voltage warning: Below 4.4V
  • Antenna: Internal
  • Dimensions: 143 × 90 × 192mm
  • Weight: Approximately 228g
  • Wheel accent colour: Depending on the selected option
  • Data interface: None
  • Online firmware updating: Not supported

RX-G7X receiver specifications:

  • Channels: 7
  • Frequency: 2.4GHz
  • Modulation: GFSK
  • Operating voltage: 4.2–10V
  • Antenna: External single antenna
  • Integrated light connections: Yes
  • Integrated winch connection: Yes
  • Dimensions: 36.6 × 23.8 × 13.4mm
  • Weight: Approximately 10g
  • Low-voltage indication: Receiver LED flashes slowly below 4.2V

Package Includes:

  • 2322 2600KV brushless motor
  • Metal gearbox
  • 45A AM32 ESC
  • NB-7D 7-channel transmitter
  • RX-G7X 7-channel receiver
  • NB-S007M metal-gear servo

Installation notice:

This is an aftermarket performance upgrade requiring mechanical installation, wiring, transmitter and receiver binding, and throttle-neutral adjustment. Installation by someone with suitable RC experience is recommended.

Disconnect the battery before changing any connections. Confirm the correct connector type, polarity and operating voltage before powering the system.

 

Shipping & Returns

We proudly deliver across Australia and New Zealand, bringing your favourite products right to your doorstep.

Shipping Costs

We offer free standard shipping on eligible orders to Australia and New Zealand.

Shipping rates and free-shipping thresholds may vary by destination and order value. The exact shipping cost will be calculated and clearly displayed at checkout before payment.

Order Processing

We aim to process in-stock orders within one business day.

Processing may take slightly longer during public holidays, peak periods or when additional order checks are required. We will contact you by email if there is a significant delay affecting your order.

Delivery and Tracking

Available shipping options and estimated delivery timeframes will be displayed at checkout after you enter your delivery address.

Once your order has been dispatched, you will receive a confirmation email containing tracking information. Tracking can sometimes take a few days to update after dispatch.

Orders containing multiple products may arrive in separate packages.

Please contact us if your tracking has not updated after eight business days, and our support team will assist you.

Returns and Refunds

We accept eligible change-of-mind returns requested within 30 days of delivery, subject to the conditions in our Returns & Refunds Policy.

Products returned due to a change of mind must be unused, unassembled, unmodified and returned with all original packaging, manuals, accessories and components. Customers are responsible for change-of-mind return postage.

Faulty, damaged or incorrectly supplied products are handled separately in accordance with our Returns & Refunds Policy and the consumer law applicable to the purchase, including the Australian Consumer Law and New Zealand Consumer Guarantees Act.

Please contact us before returning any product. Once a return is approved, we will provide the appropriate return address and instructions.

For complete eligibility requirements, exclusions, return costs, refund timeframes and faulty-product assistance, please read our Returns & Refunds Policy.

Contact Us

For shipping, delivery or return enquiries:

Email: support@thejoybox.com.au
Online: Through our Contact Us form

Our customer support team responds seven days a week and aims to reply within 24 hours.

Care Instructions

Battery Maintenance Guide (If applicable)

  • Charge the battery fully before first use, after any use, before storage or use after storage.
  • Disconnect the battery from product when not in use. Leaving the battery connected to the product when not in use, can cause damage to the battery due to gradual discharging.
  • Do not run RC products supplied with LiPo or Li-Ion batteries until the battery power becomes very low or fully discharged.  This will cause permanent damage to the battery.
  • Allow for battery to cool down prior to charging again.  This will help long battery life.
View full details